Defender SN301-8CH Instruction Manual download pdf (Page 24)

DFDVR2 22

4-4-7: PASSWORD SETUP

The password consists of 1 to 8 digits. Click the 0 ~ 9 to enter the password.

Then click ENTER to conrm the password and enter the system.

1. USER ID - Displays User ID.

2. USER PW - Enter the current password.

3. NEW PW - Enter the new password.

4. CONFIRM PW - Enter the new password again for conrmation.

Note: Always write down your password and keep it in a safe location. If you lose your

password, contact DEFENDER for support.

4-4-8: BUZZER SETUP

1. KEY TONE - Turns the beeps on or off while

operating the DVR.

2. VIDEO LOSS - Turns the alarm on or off at the

video loss.

4-5: EXTERNAL DEVICE

1. TCP/IP SETUP - Sets up the DVR’s TCP/IP

conguration (for network use).

2. SPOT SETUP - SPOT video output setup.

1. We strongly recommend that you change the following settings as soon as you

power on the DVR:

(A) Set up the time/date.

(B) Go to the HDD management and FORMAT HDD. This will clear the video you

recorded after power on and avoid any time/date discrepancies.

2. DO NOT change the date and time after the recording starts. It may corrupt the

DVR’s data archive and cause playback errors. If it is necessary to change date and

time after the recording starts, please repeat step 1 to avoid errors.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 74 75

No comments

Defender SN301-8CH Instruction Manual Page 24