Defender SN301-8CH Instruction Manual download pdf (Page 36)

DFDVR2 34

Step 1:

Open your web browser. Enter the router IP address 192.168.2.1 in the address bar,

followed by pressing Enter.

Step 2:

In the status page, select the Virtual Servers option located down the left hand side of the page.

Step 3:

In the Administrator’s page, enter your password. The default setting is left blank. Select

the Submit button.

In the Virtual Server screen proceed as follows:

- Enable the system by checking the enabled box

- In the Description column enter a description of your DVR.

- In the Inbound Port entry eld enter in the rst box the rst number of the port you

need to port forward and the ending port number in the second box in (e.g. 50000 - 50000)

- In the Type eld, select Both.

- In the Private IP Address eld, enter the IP address of the DVR

- In the Private Ports column re-enter in the rst box, the rst number of the port you

need to port forward and in the second box the ending port number (e.g. 50000 - 50000)

- Select the Apply Changes button located at the top of the page to save your changes

Port forwarding is now complete for the Belkin router!

6-2-2: D-LINK ROUTER

The port forwarding process is dependant on the brand and model number of the router being

used. Port forwarding of a router is required with your system to allow user access to your

DVR. Regardless of the DLINK Wireless Router being used, the process of port forwarding

is similar. You will need to enable the ports by locating the port range forwarding screen.

With some DLINK routers the port forwarding screen is located within the Applications and

Games or Filters tab; in others it is located in the advance tools tab. The set up instruction

outlined below is an example of port forwarding using a D-LINK Model DI-524 router.

Step 1:

Open your web browser. Enter the router IP address 192.168.0.1 in the address bar,

followed by pressing Enter.

Step 2:

Enter the user name (admin). Leave the password blank followed by pressing the OK button.

Step 3:

Select the Advanced tab.

Step 4:

- Select the Virtual Server tab.

- In the Name eld enter a description of your DVR.

- In the Private IP eld enter the DVR IP address.

- In the Protocol eld, select Both.

- In the Private port enter the port number you need to port forward (e.g. 50000)

- In the Public port re-enter the port number you entered in the private port eld (e.g. 50000)

- Select the Schedule to Always.

If more ports are required to be port forwarded, repeat the above steps. When complete,

select the Apply button located at the bottom of the page to save your changes.

Port forwarding is now complete for the D-Link router!

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 74 75

Comments to this Manuals

No comments

Defender SN301-8CH Instruction Manual Page 36

Comments to this Manuals

Related products and manuals for Security cameras Defender SN301-8CH