Defender SN500-4CH Instruction Manual download pdf (Page 85)

SN502-4CH

WIRING ADDENDUM

WIRING INSTRUCTIONS

1. Plug 12V adapter (A) into electrical wall outlet or surge protecting power bar.

2. Plug the single end of the four port power supply (C) into the male end of the 12V adapter (B).

3. Connect the 4PIN DIN female connection on the camera (E) into the 4PIN DIN male connection on the 60ft video

power wire (F).

4. Plug the power jack (G) from the 60ft video/power wire into one of the ports of the four port power supply (D).

5. Attach the BNC to RCA connector (L) to the video inputs (J) on the back of the DVR.

6. Connect the yellow male RCA plug (H) from the 60 ft cable to the BNC to RCA (K) connector on your DVR.

7. Repeat the above steps for all of the included cameras.

To wall mount the camera, drill three holes using a 3/16" drill bit and the template below. Insert the supplied wall

anchors into holes and secure camera to wall with supplied screws.

DRILL HOLES IN

THESE POSITIONS

DRILL HOLES IN

THESE POSITIONS

DRILLING TEMPLATE

.......................................................................................................Tear Here.....................................................................................................

1 2 ... 80 81 82 83 84 85 86 87 88 89 90

Comments to this Manuals

No comments

Defender SN500-4CH Instruction Manual Page 85

Comments to this Manuals