Defender DVR Instruction Manual download pdf (Page 42)

SN501-16CH

Load Setup From USB

This option can only be used if the DVR settings have been previously backed up to

USB. The DVR settings will be saved on the USB drive as DVR.cfg.

Backup Setup to USB

This will save the current DVR settings to a USB ash drive. This will not backup any

video footage to the USB drive. Use this function to save your current settings and

reload them at a later date or for setting up multiple DVRs.

DAYLIGHT SAVING TIME SETUP

This setting will allow you to set up the daylight saving times for your region.

This will be benecial so the DVR will always display the proper time even during the daylight savings months.

Daylight Savings Mode can be set to O, Manual or Auto.

O: The DVR will not compensate for daylight savings time. No changes will be made to the time automatically.

Auto: Use the default daylight savings days stored on the DVR. Make sure the date and time are set to the proper daylight savings days.

Manual: Manually set the start and end date and time for daylight savings in your area.

The delay time will be the time dierence during the daylight savings month. Ex. If the

time changes 1 hour behind then the delay will be set to 1 hour.

Auto Mode:

1. Set the Daylight Mode to AUTO.

2. Choose the City or Time Zone that most accurately reects your daylight savings dates

and times.

3. Press Menu or click the return button to save your settings.

Manual Mode:

1. Set the Daylight Mode to MANUAL.

2. Highlight the Start Date and press ENTER or click the

button.

3. Highlight the desired eld to adjust and use the directional keys or the mouse scroll wheel to adjust to the proper value.

4. Press Menu or click on the Return button to save and return to the previous Menu.

5. Repeat steps 2-4 for the End Date.

6. Set the Delay time to accurately reect the time change during the daylight savings months.

Press Menu or click the Return button to save your settings and return to the previous Menu.

4. Use the directional keys or the mouse to select either YES or NO. Select YES to load the factory default settings.

5. Click

to save settings and return to System Set.

6. Click

to save settings and return to Main Menu.

SYSTEM SETUP

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 77 78

No comments

Defender DVR Instruction Manual Page 42